Just removed from the original owners molding shop is this unusually clean and meticulously maintained Yushin YKA-150 traversing pneumatic robot. It came off an 85 ton press and was running last month. The controller and interface boxes are included as shown, as are some extra e-proms for the control system. This is a simple pneumatic robot with vacuum and gripper zone. The interface was hardwired into prior machine. The new owner may want to convert to SPI.
Vertical Stroke 900mm (servo, belt)
Traverse Stroke 1600mm (servo, belt)
Strip Stroke Travel 550mm (servo, ball screw)
Decent size for 200–400 ton press
460 volt – 3 phase power
We powered up controller / pendant only
Needs a pair of new linear bearings for vertical (some balls were lost) and some work on flex track.
Serial: 96-0705 S-36598
25" of vertical stroke, 63" of traverse stroke.
Mitsubishi FX-96 Controller with MTA-250 remote pendant.
AAC AZ-360 HP High Performance 3 Axis Servo Robot
Model AZ-360 HP (HP = High Perfromance) 3 Axis Servo Robot
VERTICAL STROKE: 36" Telescoping Design. - SERVO
TRAVERSE: 56". Dual Linear Bearing. Belt Drive. - SERVO
STRIP/CROSSWISE: 20" Reach - SERVO
Wrist: 90 degree pneumatic.
Vaccum Zones: 2 Pressure Zones: 2
2001 Star Automation TW-1200FM-3, 3 axis Servo Robot
Brand New Pendant
s/n T12G-0544 SAI SO#14566
40" vertical stroke
65 inches traverse stroke
x, y, and z strokes all servo
90 degree wrist flip.
Axmann Interroll Parts Diverter Sorter. EIGHT Available!
Year of Manufacture: 2004
Customer Item Number: FC2058
Mfg. Date: 02/02
Volts: 230 VAC / 3 Phase / 60 Hz
Amps: 30; Watts: 6.9kW
ATM Robots for 200>400 Injection Molders
ATM pneumatic parts removal robots
X, Y, and Z axis are pneumatic
Vertical stroke is 650mm cylinder, or approx 25.6"
The traverse stroke is rodless air cylinder, approx 50".
Cincinnati Milacron / AAC AZ-360 3 Axis Servo Robot
3 axis servo robot with 36" of vertical stroke and 76" of traverse stroke.
Touch screen interface, optimised control with walk through teach.
All cables and SPI interface, Good for 200 to 400 ton molding machine.
Sepro Robot Model PIP 3010 YN
payload 4.4 lbs.
x 2000mm traverse / AC freq drive
y 300mm crosswise-kick /AC freq drive
Z 800mm telescoping pneumatic vertical
MPA Controller and pendant
150 to 400 ton range.
AAC Automated Assemblies AZ-720 (620) 3-axis Servo Robot
62" vertical stroke, 120" traverse stroke, 3 axis servo
pneumatic wrist flip with option yaw/roll motion added
Optimum controller wtih Allen Bradley Touch Screen Interface
for 700 to 1500 ton molding machine
Wittmann W-322 Robot
Robot Model / Serial No. W322-5188-415
Controller Model / Serial No. CAN-BUS / 993
Stroke: x-800mm y-1400 z-3000